Коммутатор Cisco Catalyst [WS-C3560G-48PS-E]

• Configurable up to 12,000 MAC addresses

• Configurable up to 11,000 unicast routes

• Configurable up to 1000 IGMP groups and multicast routes

• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

• 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)

• 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling

• 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)

• 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling

• 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling

• 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)

• Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm

• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.

• Internal-Power-Supply Connector

• The internal power supply is an autoranging unit.

• The internal power supply supports input voltages between 100 and 240 VAC.

• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

• Cisco RPS Connector

• The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.

• The connector supports up to six external network devices and provides power totwo failed devices at a time.

• The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.

• Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-supply receptacle.

• Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications

• System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications

Dimensions
(H x W x D) (cm)