Материнская плата для сервера SuperMicro [MBD-X9DRW-CF31-O]

MBD-X9DRW-CF31-O фото
Артикул ct130995
под заказ

добавить
в избранное
добавить в избранное
добавить в избранное

авторизуйтесь

Добавляйте товары в избранное, сохраняйте корзину, получайте персональные скидки и уведомления о снижении цены!

Материнская плата X9DRW-CF31 (стандартный комплект) для сервера SYS-1027R.

Описание

Широкий выбор высококачественных серверных материнских плат SuperMicro по доступным ценам.

Характеристики
Product SKUs
MBD-X9DRW-CF31 -O
  • X9DRW-CF31 (Standard Retail Pack)
MBD-X9DRW-CF31 -B
  • X9DRW-CF31 (Bulk Pack)
Physical Stats
Form Factor
  • Proprietary WIO
Dimensions
  • 12.3" x 13" (31.2cm x 33.0cm)
Processor/Cache
CPU
  • Dual Socket R (LGA 2011)
  • Intel® Xeon® processor E5-2600
    and E5-2600 v2 family
    (up to 135W TDP **)
Note BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache
  • Up to 30MB
System Bus
  • QPI up to 8 GT/s
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM slots
  • Up to 1TB DDR3 ECC LRDIMM
  • Up to 512GB DDR3 ECC RDIMM
  • Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type
  • 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
    64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C602J chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
  • SATA2 (3Gbps) with RAID 0, 1, 5, 10
SAS
  • SAS3 support via AOM w/ Broadcom 3108
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices as default, more HDD devices support is also available as an option *

    * For special sku, please contact your Supermicro Sales.
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350-AM2 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8211E PHY (dedicated IPMI)
Video
  • G200 (Nuvoton WPCM450 BMC)
Input / Output
SATA
  • 2x SATA3 (6Gbps) ports
  • 2x SATA2 (3Gbps) ports
SAS
  • 8x SAS 3.0 (12Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 4x USB 2.0 ports total (4 rear)
Video
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 header
DOM
  • 1x DOM (Disk on Module) power connector
TPM
  • 1x TPM Header
Chassis (Optimized for X9DRW-CF31)
1U Chassis
  • CSE-116AC-R700WB
2U Chassis
  • CSE-216BE1C-R920WB
  • CSE-216BE2C-R920WB
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
SuperServer(s) with X9DRW-CF31
Model(s)
  • SYS-1027R-WC1NR
  • SYS-1027R-WC1R
Expansion Slots
PCI-Express
  • 1 (x32) PCI-E 3.0 (left riser slot)
  • 1 (x16) PCI-E 3.0 (right riser slot)
  • 1 (x16) PCI-E 3.0 (HBA Mezzanine slot)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • BIOS rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
Management
Software
  • SuperDoctor® 5
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
  • Intel Node Manager
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +12V Standby, +3.3V Standby, VBAT, Memory Voltages.
  • 6+1 Phase-switching voltage regulator
FAN
  • 6x 4-pin fan headers
  • 6x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED indicator
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
  • Dual cooling zones
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Товары категории
Вы смотрели